Send documentation comments to mdsfeedback-doc@cisco.com
11-92
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
iscsi initiator ip-address
switch(config)# no iscsi initiator ip address 10.5.0.0
The following command uses the switch's WWN pool to allocate the nWWN for this iSCSI initiator and
keeps it persistent.
switch(config-(iscsi-init))# static nWWN system-assign
The following command assigns the user provided WWN as nWWN for the iSCSI initiator. You can only
specify one nWWN for each iSCSI node.
switch(config-(iscsi-init))# nWWN 20:00:00:05:30:00:59:11
The following command uses the switch's WWN pool to allocate two pWWNs for this iSCSI initiator
and keeps it persistent.
switch(config-(iscsi-init))# static pWWN system-assign 2
The following command assigns the user provided WWN as pWWN for the iSCSI initiator.
switch(config-(iscsi-init))# pWWN 21:00:00:20:37:73:3b:20
Related Commands Command Description
show iscsi initiator Displays information about configured iSCSI initiators.
To Next Page
Loading...
