Send documentation comments to mdsfeedback-doc@cisco.com
11-141
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
ivr vsan-topology database
Examples The following command enters configuration mode, enables the IVR feature, enters the VSAN topology
database, and configures the pWWN-VSAN association for VSANs 2 and 2000:
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# ivr enable
switch(config)# ivr vsan-topology database
switch(config-ivr-topology-db)# autonomous-fabric-id 1 switch 20:00:00:00:30:00:3c:5e
vsan-ranges 2,2000
Related Commands Command Description
ivr enable Enables the Inter-VSAN Routing (IVR) feature.
autonomous0fabric-id (IVR topology
database configuration)
Configure an autonomous phobic ID into the IVR
topology database
show ivr Displays IVR feature information.
To Next Page
Loading...
