Send documentation comments to mdsfeedback-doc@cisco.com
21-24
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
set (IPsec crypto map configuration submode)
Command History
Usage Guidelines To use this command, IPsec must be enabled using the crypto ipsec enable command.
Examples The following example shows how to configure IPsec crypto map attributes.
switch# config terminal
switch(config)# crypto map domain ipsec x 1
switch(config-crypto-map-ip)# set peer auto-peer
Related Commands
Release Modification
2.0(1b) This command was introduced.
Command Description
crypto global domain ipsec
security-association lifetime
Configures the global security association lifetime value.
crypto ipsec enable Enables IPsec.
show crypto map domain ipsec Displays IPsec crypto map information.
To Next Page
Loading...
Need help?
General