Send documentation comments to mdsfeedback-doc@cisco.com
21-49
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
source
The following example shows how to configure the SPAN source interface as iSCSI interface 4/1.
switch(config-span)# source interface iscsi 4/1
The following example shows how to disable configure the SPAN source interface as FC 9/1 with an
egress filter for VSAN 1.
switch(config-span)# no source interface fc9/1 tx filter vsan 1
Related Commands Command Description
switchport Configures the switch port mode on the Fibre Channel interface.
span session Selects or configures the SPAN session and changes to SPAN
configuration submode.
destination interface Configures a SPAN destination interface.
suspend Suspends a SPAN session.
show span session Displays specific information about a SPAN session
To Next Page
Loading...
Need help?
General