Send documentation comments to mdsfeedback-doc@cisco.com
21-58
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
ssl
ssl
To configure Secure Sockets Layer (SSL), use the ssl command. Use the no form of this command to
disable this feature.
ssl kmc
no ssl kmc
Syntax Description
Defaults None.
Command Modes Cisco SME cluster configuration mode submode.
Command History
Usage Guidelines None.
Examples The following example enables SSL:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# ssl kmc
kmc Enables SSL for Key Management Center (KMC) communication.
Release Modification
3.3(1a) This command was introduced.
To Next Page
Loading...
Need help?
General