Send documentation comments to mdsfeedback-doc@cisco.com
21-61
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
ssm enable feature
switch(config) ssm enable feature santap module 4
The following example enables the SCSI flow feature on the SSM in slot 4.
switch(config) ssm enable feature scsi-flow module 4
Related Commands Command Description
scsi-flow distribute Configures the SCSI flow services.
show scsi-flow Displays SCSI flow configuration and status.
To Next Page
Loading...
Need help?
General