Send documentation comments to mdsfeedback-doc@cisco.com
21-79
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
switchport ignore bit-errors
switch# config t
switch(config)# interface fc1/1
switch(config-if)# switchport ignore bit-errors
The following example shows how to allow the detection of bit error events from disabling the interface.
switch# config t
switch(config)# interface fc1/1
switch(config-if)# no switchport ignore bit-errors
Related Commands Command Description
show interface Displays interface information.
To Next Page
Loading...
Need help?
General