EasyManua.ls Logo

Cisco mds 9124 - fabric switch

Cisco mds 9124 - fabric switch
1550 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Send documentation comments to mdsfeedback-doc@cisco.com
22-258
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show module
--- ----- -------------------------------- ------------------ --
1 32 1/2 Gbps FC Module powered-dn
2 48 1/2/4 Gbps FC Module DS-X9148 ok
4 48 1/2/4 Gbps FC Module DS-X9148 ok
6 0 Supervisor/Fabric-1 DS-X9530-SF1-K9 active *
Mod Power-Status Power Down Reason
--- ------------ ---------------------------
1 powered-dn Insufficient resources (dest Index)
switch# show port index-allocation
Module index distribution:
------------------------------------------------------+
Slot | Allowed | Alloted indices info |
| range* | Total | Index values |
-----|---------|-------|------------------------------|
1 | 0- 31| - | (None) | (Slot 2 shares 28-31)
2 | 32- 63| 48 | 28-63,240-251 |
3 | 64- 95| - | (None) |
4 | 96- 127| 48 | 96-127,224-239 |
7 | 128- 159| - | (None) |
8 | 160- 191| - | (None) |
9 | 192- 223| - | (None) |
SUP | 253-255 | 3 | 253-255 |
*Allowed range applicable only for Generation-1 modules
switch# show module 1 recovery-steps
Failure Reason:
Indices in allowed range 0 - 31 unavailable
Check "show port index-allocation" for more details
Recovery Steps:
Insert failed module in any one of the slots: 3, 7, 8, 9
The following example uses the show module, show port index-allocation, and show module
recovery-steps commands to display a Generation 1 module that is powered down because of a lack of
indices between 0 and 255.
switch# show module
Mod Ports Module-Type Model Status
--- ----- -------------------------------- ------------------ ------------
1 48 1/2/4 Gbps FC Module DS-X9148 ok
2 48 1/2/4 Gbps FC Module DS-X9148 ok
3 48 1/2/4 Gbps FC Module DS-X9148 ok
4 48 1/2/4 Gbps FC Module DS-X9148 ok
5 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 active *
6 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 ha-standby
7 48 1/2/4 Gbps FC Module DS-X9148 ok
8 24 1/2/4 Gbps FC Module DS-X9124 ok
9 32 1/2 Gbps FC Module powered-dn
Mod Power-Status Power Down Reason
--- ------------ ---------------------------
9 powered-dn Insufficient resources (dest Index)
switch# show port index-allocation
Module index distribution:
------------------------------------------------------+
Slot | Allowed | Alloted indices info |
| range | Total | Index values |
-----|---------|-------|------------------------------|

Table of Contents

Related product manuals