Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
22-259
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show module
1 | 0-1023| 48 | 160-207 |
2 | 0-1023| 48 | 3-50 |
3 | 0-1023| 48 | 0-2,208-252 |
4 | 0-1023| 48 | 51-98 |
7 | 0-1023| 48 | 99-146 |
8 | 0-1023| 24 | 147-159,256-266 |
9 | ----- | - | (None) |
SUP | 253-255 | 3 | 253-255 |
switch# show module 9 recovery-steps
Failure Reason:
Insufficient indices in range 0-255. Module cannot be powered up
The following example uses the show module, show port index-allocation, and show module
recovery-steps commands to display a Generation 1 module that is powered down due to
non-availability of contiguous indices.
switch# show module
Mod Ports Module-Type Model Status
--- ----- -------------------------------- ------------------ --
1 48 1/2/4 Gbps FC Module powered-dn
3 12 1/2/4 Gbps FC Module DS-X9112 ok
4 8 IP Storage Services Module powered-dn
5 48 1/2/4 Gbps FC Module DS-X9148 ok
6 48 1/2/4 Gbps FC Module DS-X9148 ok
7 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 active *
8 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 ha-standby
9 24 1/2/4 Gbps FC Module DS-X9124 ok
11 4 10 Gbps FC Module DS-X9704 ok
12 48 1/2/4 Gbps FC Module DS-X9148 ok
13 16 1/2 Gbps FC Module DS-X9016 ok
Mod Power-Status Power Down Reason
--- ------------ ---------------------------
1 powered-dn Config down
4 powered-dn Insufficient resources (dest Index)
Mod Sw Hw World-Wide-Name(s) (WWN)
--- ----------- ------ --------------------------------------------------
3 3.0(0.322) 0.222 20:81:00:05:30:01:9c:02 to 20:8c:00:05:30:01:9c:02
switch# show port index-allocation
Module index distribution:
------------------------------------------------------+
Slot | Allowed | Alloted indices info |
| range | Total | Index values |
-----|---------|-------|------------------------------|
1 | ----- | - | (None) |
2 | ----- | - | (None) |
3 | 0- 255| 12 | 219-230 |
4 | ----- | - | (None) |
5 | 0- 255| 48 | 0-13,74-79,96-123 |
6 | 0- 255| 48 | 124-150,232-252 |
9 | 0- 255| 24 | 154-177 |
10 | ----- | - | (None) |
11 | 0- 255| 4 | 151-153,231 |
12 | 0- 255| 48 | 32-73,178-183 |
13 | 0- 255| 16 | 80-95 |
SUP | 253-255 | 3 | 253-255 |
switch# show module 4 recovery-steps
Failure Reason: