Send documentation comments to mdsfeedback-doc@cisco.com
21-34
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
sme
The following example disables automatic configuration save after changes:
switch# config t
switch(config)# no sme auto-save
switch(config)#
The following example shows how to configure transport PSK:
switch# config t
switch(config)# sme transport pre-shared key keyname cluster clustername
Related Commands Command Description
cluster enable Enable Cisco SME clustering.
show sme cluster Displays information about Cisco SME cluster.
To Next Page
Loading...
