Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
1-22
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 1 CLI Overview
Searching and Filtering CLI Output
fc4/6 1 FX -- sfpAbsent -- -- --
fc4/7 1 FX -- sfpAbsent -- -- --
fc4/8 1 FX -- sfpAbsent -- -- --
fc4/9 1 E on notConnected swl -- --
fc4/10 1 FX -- sfpAbsent -- -- --
fc4/11 1 FX -- sfpAbsent -- -- --
fc4/12 1 FX -- sfpAbsent -- -- --
fc4/13 1 FX -- sfpAbsent -- -- --
fc4/14 1 FX -- sfpAbsent -- -- --
fc4/15 1 FX -- sfpAbsent -- -- --
--More--
The following is partial sample output of the show running-config | exclude EXEC command. It
excludes any output line that contain the pattern
vsan.
switch# show running-config | exclude vsan
version 2.1(1a)
poweroff module 9
fcdomain fcid database
ssm enable feature nasb interface fc4/1-4
ssm enable feature santap module 4
ssm enable feature nasb interface fc9/1-4
ssm enable feature santap interface fc9/5-8
ssm enable feature santap interface fc9/21-28
switchname switch
boot kickstart bootflash:/b2193 sup-1
boot system bootflash:/r2193 sup-1
boot kickstart bootflash:/b2193 sup-2
boot system bootflash:/r2193 sup-2
boot ssi bootflash:/laslc1.bin module 1
boot ssi bootflash:/laslc1.bin module 2
boot ssi bootflash:/laslc1.bin module 3
boot ssi bootflash:/laslc1.bin module 4
boot ssi bootflash:/laslc1.bin module 7
boot ssi bootflash:/laslc1.bin module 8
boot ssi bootflash:/laslc1.bin module 9
line console
speed 38400
--More--
The following is partial sample output of the show interface EXEC command. It includes all output with
the pattern
vsan.
switch# show interface | include vsan
Port vsan is 1
Port vsan is 1
Port vsan is 1
Port vsan is 1
Port vsan is 1
Port vsan is 1
[information deleted]
The following is partial sample output of the show interface EXEC command. It includes all output with
the pattern
FX plus the next and previous five lines of output.
switch# show interface | include FX next 5 prev 5
fc4/1 is down (SFP not present)
Hardware is Fibre Channel
Port WWN is 20:c1:00:05:30:00:06:de
Admin port mode is FX
Port vsan is 1
Receive data field Size is 2112
Beacon is turned off
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec