Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
1-23
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 1 CLI Overview
Searching and Filtering CLI Output
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
--
0 transmit B2B credit remaining
fc4/2 is down (SFP not present)
Hardware is Fibre Channel
Port WWN is 20:c2:00:05:30:00:06:de
Admin port mode is FX
Port vsan is 1
Receive data field Size is 2112
Beacon is turned off
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
--
--More--
The following output of the show running-config EXEC command. It displays the number lines, or
count, of the output.
switch# show running-config | count
214
switch#
The following output of the show interface brief EXEC command. It displays the interfaces where the
administration mode is
FX.
switch# show interface brief | include FX
fc4/1 1 FX -- sfpAbsent -- -- --
fc4/2 1 FX -- sfpAbsent -- -- --
fc4/3 1 FX -- sfpAbsent -- -- --
fc4/4 1 FX -- sfpAbsent -- -- --
fc4/5 1 FX -- up swl F 1 --
fc4/6 1 FX -- sfpAbsent -- -- --
fc4/7 1 FX -- sfpAbsent -- -- --
fc4/8 1 FX -- sfpAbsent -- -- --
fc4/10 1 FX -- sfpAbsent -- -- --
fc4/11 1 FX -- sfpAbsent -- -- --
fc4/12 1 FX -- sfpAbsent -- -- --
fc4/13 1 FX -- sfpAbsent -- -- --
fc4/14 1 FX -- sfpAbsent -- -- --
fc4/15 1 FX -- sfpAbsent -- -- --
fc4/16 1 FX -- sfpAbsent -- -- --
fc4/17 1 FX -- sfpAbsent -- -- --
fc4/18 1 FX -- sfpAbsent -- -- --
fc4/19 1 FX -- sfpAbsent -- -- --
fc4/20 1 FX -- sfpAbsent -- -- --
fc4/21 1 FX -- sfpAbsent -- -- --
fc4/22 1 FX -- sfpAbsent -- -- --
fc4/23 1 FX -- sfpAbsent -- -- --
fc4/24 1 FX -- sfpAbsent -- -- --
fc4/25 1 FX -- sfpAbsent -- -- --
fc4/26 1 FX -- sfpAbsent -- -- --
fc4/27 1 FX -- sfpAbsent -- -- --
fc4/28 1 FX -- down swl -- --
fc4/29 1 FX -- sfpAbsent -- -- --
fc4/30 1 FX -- sfpAbsent -- -- --
fc4/31 1 FX -- sfpAbsent -- -- --
fc4/32 1 FX -- sfpAbsent -- -- --
switch#
The following output of the show interface brief EXEC command uses multiple filter commands. It
display the number of interfaces, or count, where the administration mode is
FX.
switch# show interface brief | include FX | count