Siemens SCALANCE S615 Configuration Manual

Functions specific to SCALANCE
3.4 SRS
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
101
3.4.3.3
logon addr
Note
This command is only available with a KEY
-PLUG.
Description
With this command, you create a destination server entry.
Requirement
You are in the SRS configuration mode.
The command prompt is as follows:
cli(config-srs)#
Syntax
Call up the command with the following parameters:
logon addr <ip_addr|dns> group <descr(255)> name <name(255)> pw <password(100)> [{on
| off}]
The parameters have the following meaning:
Parameter
Description
Range of values / note
ip_addr
IPv4 address Enter the IPv4 address of the
proxy server.
dns
DNS host name Enter the DNS host name of the
proxy server.
Maximum of 50 characters
group
Keyword for the group name
-
descr
Group name
Enter a group name.
name
Keyword for the user name
-
name
User name for access to the destina-
tion server
Specify the negotiated user name.
Maximum of 255 characters
pw
Keyword for the password
-
password
Password for access to the destination
server
Enter the negotiated password.
Maximum of 100 characters
on
Enables the transfer of the external IP
address. This transfer is made using
the secure HTTPS protocol.
-
off
Disables the transfer of the external IP
address.
-

Siemens SCALANCE S615 Specifications

General

Protocols	IPsec, OpenVPN
Power Supply	24 V DC
Mounting Type	DIN Rail
Product Name	SCALANCE S615
Ports	5
Firewall	Yes
Weight	0.6 kg
Certifications	CE