Siemens SCALANCE S615 - No Shutdown

Security and authentication
9.2 Firewall
SCALANCE S615 Command Line Interface
354 Configuration Manual, 06/2015, C79000-G8976-C406-02
Syntax
Call the command without parameter assignment:
shutdown
Result
The firewall is disabled.
Further notes
You enable the firewall with the no shutdown command.
9.2.4.44
no shutdown
Description
With this command, you enable the firewall.
Requirement
You are in the FIREWALL configuration mode.
The command prompt is as follows:
cli(config-fw)#
Syntax
Call the command without parameter assignment:
no shutdown
Result
The firewall is enabled.
Further notes
You disable the firewall with the shutdown command.