Siemens SCALANCE S615 - Send Test Mail

Network protocols
6.10 SMTP client
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
273
6.10.2.7
send test mail
Description
With this command, you send an e-mail according to the currently configured SMTP settings.
Requirement
You are in the EVENTS configuration mode.
The command prompt is as follows:
cli(config-events)#
Syntax
Call the command without parameters:
send test mail
Result
An e-mail according to the currently configured SMTP settings was sent.
Further notes
You can display the current SMTP settings with the show events emailserver command.