Network structures
5.1 VLAN
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
157
shutdown complete
Description
With this command, you shut down the interface.
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Call the command without parameters:
shutdown complete
The Interface is shut down. A connection continues to be indicated if a switch port is turned
off. The LED for the port status flashes 3 times cyclically. However no data is sent or
received.
You activate the interface with the no shutdown command.
You can display the status of this function and other information with the
show
interfaces
command.
To Next Page
Loading...
Need help?
General
