Siemens SCALANCE S615 - Show Ipsec Conn-Phase1; Show Ipsec Conn-Phase2

Security and authentication
9.3 IPsec VPN
SCALANCE S615 Command Line Interface
356 Configuration Manual, 06/2015, C79000-G8976-C406-02
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameter assignment:
show ipsecvpn connections
Result
The configurations are displayed.
9.3.1.3
show ipsec conn-phase1
Description
This command shows the configuration of phase 1 of the IPsecVPN connections.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameter assignment:
show ipsec conn-phase1
Result
The configurations are displayed.
9.3.1.4
show ipsec conn-phase2
Description
This command shows the configuration of phase 2 of the IPsecVPN connections.