Network protocols
6.9 Proxy server
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
259
You delete this proxy server with the no srv command.
You change the parameters with the
srv name... commands.
You display this setting and other information with the
show proxyserver table command.
With this command, you delete a specific proxy server or all proxy servers.
● The corresponding proxy server name has been created and is not being used anywhere.
● You are in the PROXYSERVER configuration mode.
The command prompt is as follows:
cli(config-proxysrv)#
Call up the command with the following parameters:
no srv {name <string(128)> | all}
The parameters have the following meaning:
Keyword for proxy server name
-
Proxy server name Specify a valid proxy server
name.
Maximum of 128 characters
Deletes all proxy servers
The specified proxy server is deleted.
You create the proxy server with the srv name command.
You display the available proxy server names with the
srv show-names command.
To Next Page
Loading...
Need help?
General
