Functions specific to SCALANCE
3.5 SINEMA RC
SCALANCE S615 Command Line Interface
116 Configuration Manual, 06/2015, C79000-G8976-C406-02
command is only available with a KEY-PLUG.
With this command, you set the port via which the WBM of the SINEMA RC Server can be
reached.
You are in the SINEMARC configuration mode.
The command prompt is as follows:
cli(config-sinemarc)#
Call up the command with the following parameters:
port <number(1-65535)>
The parameter has the following meaning:
number Port number Specify the port.
The port is configured.
You display this setting and other information with the show sinemarc command.
To Next Page
Loading...
