Siemens SCALANCE S615 - No Proxy

Functions specific to SCALANCE
3.5 SINEMA RC
SCALANCE S615 Command Line Interface
118 Configuration Manual, 06/2015, C79000-G8976-C406-02
3.5.4.8
no proxy
Note
This command is only available with a KEY
-PLUG.
Description
With this command, you remove the proxy server.
Requirement
You are in the SINEMARC configuration mode.
The command prompt is as follows:
cli(config-sinemarc)#
Syntax
Call the command without parameter assignment:
no proxy
Result
The proxy server is removed.
Further notes
You configure the proxy server with the proxy command.
You display this setting and other information with the
show sinemarc command.