Siemens SCALANCE S615 - Srv Name Auth; Srv Name Port

Network protocols
6.9 Proxy server
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
261
6.9.3.4
srv name auth
Description
With this command, you change the authentication method of the proxy server.
Requirement
● The proxy server name has been created.
● You are in the PROXYSERVER configuration mode.
The command prompt is as follows:
cli(config-proxysrv)#
Syntax
Call up the command with the following parameters:
srv name <string(128)> auth <none|basic|ntlm>
The parameters have the following meaning:
Parameter
Description
Range of values / note
string
Proxy server name Specify the proxy server
name.
Maximum of 128 characters
none
No authentication
-
basic
Standard authentication
The user name and password are sent
unencrypted.
-
ntlm
Authentication according to the NTML
standard (Windows user logon)
-
Result
The authentication method has been changed.
Further notes
You display the available proxy server names with the srv show-names command.
You create the proxy server with the
srv name command.
6.9.3.5
srv name port
Description
With this command, you change the port of the proxy server.