SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
87
Functions specific to SCALANCE
This part contains the sections that describe functions specific to SCALANCE.
The C-PLUG or KEY-PLUG stores the configuration of a device and can therefore transfer
the configuration of the old device to the new device when a device is replaced.
In addition to the configuration, the KEY-PLUG also contains a license that enables the use
of certain functions.
This section describes commands relevant for working with the C-PLUG or KEY-PLUG.
This command shows the current C-PLUG or KEY-PLUG information.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameters:
show plug
The current information of the C-PLUG or KEY-PLUG is displayed.
To Next Page
Loading...
Need help?
General
