System time
4.1 System time setting
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
125
With this command, you set the system clock.
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Call up the command with the following parameters:
time set hh:mm:ss <day (1-31)>
{january|february|march|april|may|june|july|august|september|october|november|decembe
r}
<year (2000 - 2035)>
The parameters have the following meaning:
Time of day Hour, minute, second each sepa-
Day of the month 1 ... 31
- Month january, february, march, april,
may, june, july, august, septem-
ber, october, november, decem-
The system time is set.
You display the settings for the system clock with the show time command.
To Next Page
Loading...
Need help?
General
