Security and authentication
9.3 IPsec VPN
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
361
no connection all
Description
With this command, you delete all VPN connections.
● The VPN connection have been created and are not being used anywhere.
● You are in the IPSEC CONNECTION configuration mode.
The command prompt is as follows:
cli(config-ipsec-conn-X)#
Call the command without parameter assignment:
no connection all
All VPN connections are deleted.
You display the VPN connection with the connection name command.
With this command, you specify whether the validity of the certificates is checked based on
the CRL (Certificate Revocation List).
You are in the IPSEC configuration mode.
The command prompt is as follows:
cli(config-ipsec)#
Call up the command with the following parameters:
CRL-policy <yes|no|ifuri>
To Next Page
Loading...
Need help?
General
