Configuration
2.1 System
SCALANCE S615 Command Line Interface
52 Configuration Manual, 06/2015, C79000-G8976-C406-02
coordinates latitude
Description
With this command, you enter a latitude coordinate.
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Call up the command with the following parameters:
coordinates latitude <latitude>
The parameter has the following meaning:
Input box for the latitude coordinate max. 32 characters
To use spaces in the entry, enter
the latitude coordinate in quotes:
coordinates latitude "123
The latitude coordinate is created.
coordinates longitude
Description
With this command, you enter a longitude coordinate.
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Call up the command with the following parameters:
coordinates longitude <longitude>
To Next Page
Loading...
Need help?
General
