Description
1.6 General CLI commands
SCALANCE S615 Command Line Interface
32 Configuration Manual, 06/2015, C79000-G8976-C406-02
If you call up help without parameters, you will obtain a list of all permitted commands in the
current mode:
help
The mode-specific as well as the global commands are displayed.
Note
Incomplete command names
If you have specified an incomplete command when calling help, a list of all commands that
start with the term you have entered is created.
The command "?"
Description
With this command, you call up the command list.
Enter a question mark to obtain a list of all permitted commands in the current mode:
?
For this command, you do not need to press the enter key. The command executes
immediately after you type the character.
The mode-specific as well as the global commands are displayed.
Note
Incomplete command names
If you have specified an incomplete command when calling the help function, a list of all
commands that start with the term you have entered is created.
Note
Output in pages
With long lists, the results are displayed as pages. If
-- more --
appears at the lower edge of
the display, you can move to the next page with the spacebar. If the display is in pages, you
cannot page back. You exit the page display with the q
key.
To Next Page
Loading...
Need help?
General
