Network structures
5.1 VLAN
SCALANCE S615 Command Line Interface
142 Configuration Manual, 06/2015, C79000-G8976-C406-02
show vlan learning params
Description
This command shows the parameters for the automatic learning of addresses for selected or
all VLANs (active and inactive VLANs).
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call up the command with the following parameters:
show vlan learning params[vlan<vlan-range>]
The parameters have the following meaning:
Keyword for a VLAN or VLAN range
Number of the addressed VLAN or VLAN range
If you do not select any parameter from the parameter list, the entries of all available
interfaces are displayed.
The settings for the automatic learning of addresses are displayed.
To Next Page
Loading...
Need help?
General
