Siemens SCALANCE S615 - Show Firewallnat Napt; Show Firewallnat Netmap-Map

Layer 3 functions
8.1 NAT
SCALANCE S615 Command Line Interface
286 Configuration Manual, 06/2015, C79000-G8976-C406-02
8.1.1.2
show firewallnat napt
Description
This command shows the configured NAPT rules.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameter assignment:
show firewallnat napt
Result
The configured NAPT rules are displayed.
8.1.1.3
show firewallnat netmap-map
Description
This command shows the configured NETMAP rules.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameter assignment:
show firewallnat netmap-nat
Result
The configured NETMAP rules are displayed.