Siemens SCALANCE S615 - Show Snmp Group Access; Show Snmp Inform Statistics

Network protocols
6.6 SNMP
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
225
6.6.1.6
show snmp group access
Description
This command shows the rights of the configured SNMP groups.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp group access
Result
The rights of the configured SNMP groups are displayed.
6.6.1.7
show snmp inform statistics
Description
This command shows the statistics of the Inform Messages.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp inform statistics
Result
The statistics of the Inform Messages are displayed.