Configuration
2.1 System
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
57
Call up the command with the following parameters:
system contact <string>
The parameter has the following meaning:
Input box for contact information
The contact information is created in the system.
system location
Description
With this command, you enter the location information for the system.
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Call up the command with the following parameters:
system location <string>
The parameter has the following meaning:
Input box for the location information max. 255 characters
The location information is created in the system.
To Next Page
Loading...
Need help?
General
