Siemens SCALANCE S615 - Show Snmp Community; Show Snmp Engineid

Network protocols
6.6 SNMP
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
223
6.6.1.2
show snmp community
Description
This command shows the details of the configured of SNMP communities.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp community
Result
The details of the configured SNMP communities are displayed.
6.6.1.3
show snmp engineID
Description
This command shows the SNMP identification number of the device.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp engineID
Result
The SNMP identification number of the device is displayed.