Network protocols
6.10 SMTP client
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
271
The SMTP server entry is deleted.
You configure an SMTP server entry with the smtp-server command.
With this command, you configure an SMTP port.
You are in the EVENTS configuration mode.
The command prompt is as follows:
cli(config-events)#
Call up the command with the following parameters:
smtp-port <smtp-port(1-65535)>
The parameter has the following meaning:
Value for the SMTP port 1 ... 65535
An SMTP port is configured.
You can reset the setting to the default with the no smtp-port command.
You display the setting with the
show smtp-port command.
To Next Page
Loading...
Need help?
General
