Siemens SCALANCE S615 - Dimension drawings; CAx data

Configuration
2.1 System
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
67
2.1.10.11
no shutdown
Description
With this command, you shut down an interface.
Requirement
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
no shutdown
Result
The Interface is activated.
Further notes
You activate the interface with the shutdown complete command.
You can display the status of this function and other information with the
show
interfaces
command.