Siemens SCALANCE S615 - Show Snmp Filter; Show Snmp Group

Network protocols
6.6 SNMP
SCALANCE S615 Command Line Interface
224 Configuration Manual, 06/2015, C79000-G8976-C406-02
6.6.1.4
show snmp filter
Description
This command shows the configured SNMP filters.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp filter
Result
The configured SNMP filters are displayed.
6.6.1.5
show snmp group
Description
This command shows the configured SNMP groups.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp group
Result
The configured SNMP groups are displayed.