Siemens SCALANCE S615 - Show Firewall Information; Show Firewall Ip-Protocols

Security and authentication
9.2 Firewall
SCALANCE S615 Command Line Interface
310 Configuration Manual, 06/2015, C79000-G8976-C406-02
9.2.2.2
show firewall information
Description
This command shows the configuration of the firewall.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameter assignment:
show firewall information
Result
The configuration is displayed.
9.2.2.3
show firewall ip-protocols
Description
This command displays the configured protocols.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameter assignment:
show firewall ip-protocols
Result
The configured protocols are displayed.