Network protocols
6.5 DNS
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
213
The parameters have the following meaning:
The device uses all available DNS
Default
The device uses only the manually
configured DNS servers.
-
The device uses the DNS servers that
are transferred automatically.
-
The device uses the specified DNS servers.
You display this setting and other information with the show dnsclient information
command.
You create a manually configured DNS server with the
manual srv command.
With this command, you end the DNS client.
You are in the DNS CLIENT configuration mode.
The command prompt is as follows:
cli(config-dnsclient)#
Call the command without parameter assignment:
shutdown
The DNS client is ended.
You start the DNS client with the no shutdown command.
To Next Page
Loading...
Need help?
General
