SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
171
This part contains the sections that describe the commands for working with the various
network protocols.
This section describes commands of the Internet Protocol (IP) version 4.
This section describes commands with which you display various settings.
With the command
do [command] you can execute the "show" commands in every
configuration mode.
To do this, you replace
[command] with the "show" command that you want to execute.
do show cli-console-timeout
This command shows information about the DNS client, for example the status of the DNS
client and parameters for querying the DNS server.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameters:
show ip dns
Information on the DNS client is displayed.
To Next Page
Loading...
Need help?
General
