Configuration
2.1 System
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
39
The following information about the device is displayed:
● MAC address of the device
● Serial Number
● System up time
● System name
● System contact
● System location
● Device Type
● Restart counter
● Config Save mode
● Config Change: This indicates whether or not the current configuration has been saved.
● Login Authentication mode: This indicates whether the authentication is made locally or
on the RADIUS server.
show interfaces
Description
This command shows the status and the configuration of one, several or all interfaces.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call up the command with the following parameters:
show interfaces
[{
[<interface-type><interface-id>]
[{description|status}]
|
{vlan<vlan-id(1-4094)>}
}]
To Next Page
Loading...
Need help?
General
