Siemens SCALANCE S615 Configuration Manual

Configuration
2.2 Load and Save
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
71
The parameters have the following meaning:
Parameter
Description
Range of values / note
ipv4
Keyword for an IPv4 address
-
ipv4-address
Value for an IPv4 unicast address Enter a valid IPv4 unicast ad-
dress.
port
Keyword for the port of the server via
which the TFTP connection runs
-
tcp port
Number of the port 1 … 65535
Default: 69
file
Keyword for a file name to be assigned
-
filename
Name of the file
max. 100 characters
filetype
Keyword for the file type to be loaded
-
filetype
Name of the file type
max. 100 characters
For information on identifiers of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 25)".
Result
The file is loaded on the device from the TFTP server.
Further notes
With the "show loadsave files" command, you can display the file types.
2.2.3
save filetype
Description
With this command, you save files on a TFTP server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call up the command with the following parameters:
save filetype <filetype> tftp ipv4 <ipv4-address> [port <tcp port (1-65535)>] file
<filename>

Siemens SCALANCE S615 Specifications

General

Protocols	IPsec, OpenVPN
Power Supply	24 V DC
Mounting Type	DIN Rail
Product Name	SCALANCE S615
Ports	5
Firewall	Yes
Weight	0.6 kg
Certifications	CE