Siemens SCALANCE S615 - Maintenance and cleaning; Unauthorized repair of devices in explosion-proof design; Impermissible accessories and spare parts; Hot surfaces

Configuration
2.1 System
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
59
2.1.10.1
alias
Description
With this command, you assign a name to an interface. The name only provides information
and has no effect on the configuration.
Requirement
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
alias <port-name>
The parameter has the following meaning:
Parameter
Description
Range of values / note
port-name
Name of the interface
max. 63 characters
Result
The interface was assigned a name.
Further notes
You delete the name of the interface with the no alias command.
2.1.10.2
no alias
Description
With this command, you delete the name of the interface.
Requirement
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#