Functions specific to SCALANCE
3.1 PLUG
SCALANCE S615 Command Line Interface
90 Configuration Manual, 06/2015, C79000-G8976-C406-02
With this command, you format the C-PLUG or KEY-PLUG and copy the current device
configuration to it.
● The C-PLUG or KEY-PLUG is formatted.
● You are in the Plug Configuration mode.
The command prompt is:
cli(config-plug)#
Call the command without parameter assignment:
write
The current device configuration has been copied to the formatted C-PLUG or KEY-PLUG.
To Next Page
Loading...
