Network structures
5.1 VLAN
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
149
no map protocol
Description
With this command, you delete a protocol from all protocol groups.
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Call up the command with the following parameters:
no map protocol
{ip | novell | netbios | appletalk | other <aa:aa>}
enet-v2
The parameters have the following meaning:
Appletalk
Other protocol. enter the hexadecimal protocol
value.
• other: aa:aa
• IPV6:
86:DD
• LLDP:
88:CC
• PTP IEEE1588:
88:F7
• EAP (802.1X):
Frame structure is Ethernet II
The protocol is removed from all protocol groups.
You create the protocol group with the map protocol command.
You can display the status of this function and other information with the
show vlan
protocols-group
command.
To Next Page
Loading...
Need help?
General
