Siemens SCALANCE S615 - Show Snmp User; Show Snmp Viewtree

Network protocols
6.6 SNMP
SCALANCE S615 Command Line Interface
228 Configuration Manual, 06/2015, C79000-G8976-C406-02
6.6.1.12
show snmp user
Description
This command shows the settings for the SNMP user.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp user
Result
The settings for the SNMP user are displayed.
6.6.1.13
show snmp viewtree
Description
This command shows the settings for the SNMP tree views.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp viewtree
Result
The settings for the SNMP tree views are displayed.