Siemens SCALANCE S615 - Show User-Accounts; Whoami

Security and authentication
9.1 User rights management
SCALANCE S615 Command Line Interface
304 Configuration Manual, 06/2015, C79000-G8976-C406-02
9.1.2
show user-accounts
Description
This command shows the created users.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show user-accounts
Result
The created users are shown.
9.1.3
whoami
Description
This command shows the user name of the logged in user.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
whoami
Result
The user name of the logged in user is displayed.