Siemens SCALANCE S615 - Digital Output Open

Functions specific to SCALANCE
3.3 Digital input/output
SCALANCE S615 Command Line Interface
96 Configuration Manual, 06/2015, C79000-G8976-C406-02
Syntax
Call the command without parameters:
digital output close
Result
The digital output is closed.
Further notes
You open the digital output with the digital output open command.
You can display the setting of the digital output with the
show digital output command
3.3.3.2
digital output open
Description
This command opens the digital output.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
digital output open
Result
The digital output is opened.
Further notes
You close the digital output with the digital output close command.
You can display the setting of the digital output with the
show digital output command