Configuration
2.2 Load and Save
SCALANCE S615 Command Line Interface
70 Configuration Manual, 06/2015, C79000-G8976-C406-02
show loadsave tftp
Description
This command shows the current configuration of the TFTP server for Load&Save.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameters:
show loadsave tftp
The current configuration of the TFTP server for Load&Save is displayed.
With this command, you load the files from a TFTP server.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call up the command with the following parameters:
load tftp ipv4 <ipv4-address> [port <tcp port (1-65535)>] file <filename> filetype
<filetype>
To Next Page
Loading...
Need help?
General
