Siemens SCALANCE S615 - Preface; Purpose of the operating instructions; Documentation on the Internet

SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
3
Preface
Validity of the configuration manual
This Configuration Manual covers the following product:
● SCALANCE S615
This Configuration Manual applies to the following software version:
● SCALANCE S-615 firmware as of version V04.00
Purpose of the Configuration Manual
This Configuration Manual contains the CLI commands that are supported by the
SCALANCE S615. You will find the document on the supplied data medium.
Orientation in the documentation
Apart from the Configuration Manual you are currently reading, the following documentation
is also available on the topic of Remote Network:
● Configuration manual SCALANCE S615 Web Based Management
This document is intended to provide you with the information you require to commission
and configure SCALANCE S615 devices using the Web Based Management.
● Getting Started SCALANCE S615
Based on examples, this document explains the configuration of the SCALANCE S 615
device.
● Operating Instructions SINEMA RC Server
You will find this document on the Internet pages of Siemens Industry Online Support. It
contains information on the installation, configuration and operation of the application
SINEMA Remote Connect Server.