Network protocols
6.5 DNS
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
221
You are in the DDNS Client configuration mode.
The command prompt is as follows:
cli(config-ddnsclient)#
Call up the command with the following parameters:
password {show
-services | <index> <password>
} The parameters have the following meaning:
Lists the available providers.
Number corresponding to a specific
Specify a valid number.
Enter the negotiated password.
The password is configured.
You display this setting and other information with the show ddnsclient information
command.
You configure the user name with the
username command.
To Next Page
Loading...
Need help?
General
