Siemens SCALANCE S615 - Page 308

Security and authentication
9.1 User rights management
SCALANCE S615 Command Line Interface
308 Configuration Manual, 06/2015, C79000-G8976-C406-02
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
username {admin} password <passwd>
The parameters have the following meaning:
Parameter
Description
Range of values / note
admin
User name
Specify the user name.
password
Keyword for a password -
passwd
Value for the password Enter the password.
The password must meet the following
password policies:
• Password length: at least 8 characters
• at least 1 uppercase letter
• at least 1 special character
• at least 1 number
Result
The password is changed.
Note
Changing the password in Trial mode
Even if you change the password in Trial mod
e, this change is saved immediately.
Further notes
You create a user with the user-account command.
You delete a user with the
no user-account command.
You show the created users with the
show user-accounts command.