Siemens SCALANCE S615 Configuration Manual

Configuration
2.4 Configuration Save & Restore
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
83
Parameter
Description
Range of values
http
Shows the configuration settings of the Hyper-
text Transfer Protocol.
-
sntp
Shows the configuration settings of the Simple
Network Time Protocol.
-
http
Shows the configuration settings of the Hyper-
text Transfer Protocol.
-
auto-logout
Shows the configuration settings of the auto
logout function.
-
time
Shows the configuration settings of the system
time.
-
ntp
Shows the configuration settings of the Network
Time Protocol.
-
auto-save
Shows the configuration settings of the auto
save function.
-
events
Shows the configuration settings of the system
events.
-
firewall
Shows the configuration settings of the firewall.
-
firewallnat
Shows the configuration settings of the NAT.
-
sinemarc
Shows the configuration settings of the SINEMA
RC connection.
-
proxyserver
Shows the configuration settings of the proxy
servers.
-
srs
Shows the configuration settings of SRS. -
all
Shows all configuration settings.
-
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 25)".
If you call up the command without parameters, only the active operational settings of all
modules and all interfaces that do not match the preset values are displayed.
Result
The selected configuration settings of the device are displayed.

Siemens SCALANCE S615 Specifications

General

Protocols	IPsec, OpenVPN
Power Supply	24 V DC
Mounting Type	DIN Rail
Product Name	SCALANCE S615
Ports	5
Firewall	Yes
Weight	0.6 kg
Certifications	CE